10 Basic Safety Guidelines For Pruning And Trimming Trees

10 Basic Safety Guidelines For Pruning And Trimming Trees

Trees provide numerous benefits. Their leaves give us shade and homes for other living things. But, what do you do when the tree slowly claims territory on a part of your home?  The removal seems easy, but it’s essential to consult your city for guidelines if you’re planning to remove a tree. In Florida, there are conditions to follow for tree removal. There may be an agreement to replant a tree upon removal of the old one.

Before delving yourself into pruning and trimming trees, here are the useful safety tips that you must follow:

Conduct a Preliminary Evaluation Before Doing the Undertaking

The diversity of trees when it comes to types and shapes makes the undertaking challenging and dangerous. Tree professionals can adequately educate you about the trees around you.

By having a proper assessment, you can have confidence that you won’t be penalized. Experts can guide on replanting a tree that will mature at the same height as the removed tree.

Inspect Your Area

It’s crucial to check all the things near the tree that has to be removed, especially if there are live wires. Pay attention and handle conductive tools with care when you’re near the power lines.

If the tree branches are overhanging your roof, it’s recommended to hire an arborist to prevent damage on your rooftop and the entire property.

Know the Right Time When To Do the Tree Service

It’s dangerous to climb a tree when there’s a storm. People are also advised to stay away from a tree during bad weather to avoid being electrocuted by lightning.

Check the weather before starting to do the job. It’s better to wait until another considerable time becomes available to remove the tree.

The Person Who Will Do the Task Must Have a Permit

There are specific trees that can never be removed without a permit such as those that reached a height of greater than 20 feet because they’re native to the local ecology.

Apply for tree removal permit to comply with the County Regulations. Failure to follow will result to fine and replanting fee.  Take note that the authorization will expire after 60 days.

Wear the Right Equipment to Protect Yourself

Professional tree service experts always bring all the equipment for personal protection. PPE (Personal Protective Equipment) includes:

Lineman’s gloves will protect your hands from being injured or punctured by sharp surfaces of the tree.

Close-fitting, long-sleeved clothing and non-conductive hard hat will secure you from being electrocuted when there are live wires near the tree.

Eye protection will make you safe against dust, pine needles, and wood particles.

Using the chainsaw is disturbing to your ears. It’s necessary to wear ear protection when trimming the tree.

Protective shoes with a heel and slip-resistant soles will ensure that you won’t fall and stay balanced when you are up there.

Identify the Right Spots to Support Your Weight

A thick tree limb may seem robust to carry you, but it depends on the condition of the tree. It may be possible for a healthy tree to support you but if the tree underwent infestation, branches might be brittle, and it’s risky to climb up there.

Establishing a bridge of support on a sturdy branch ensures that you can avoid unexpected fall when a branch is cut. Arborists use strong ropes to support them.

Reach the Right Height for Cutting the Branch

You must check and set a temporary anchorage before establishing a higher anchoring point to climb higher. It’s essential that the anchorage point is not lower than the most upper area you will be reaching.

When you reach the area to be cut, it’s crucial to remove any distractions such as unnecessary ropes before engaging to your cutting tool to do the job effectively.

Conduct a Two-Way Process of Cutting

The proper way of cutting branches to avoid being injured is cut one foot away from the trunk first before you do the final cut up against the tree trunk.

Most professionals spare one-inch-deep cut on the bottom side of the branch and move one inch further towards the extended part before thoroughly cutting the tree limb. This is the technique that they do to allow the tree branch to regrow.

Provide Awareness for Drop Zone for Everyone’s Safety

Drop zone should be twice the radius of the section lengths being cut from the tree. The minimum range is 5 meters. It’s the dangerous spot where the tree will land during felling or pruning operations. Warn people around the place to stay out of the way of falling branches.

Hire a Professional Arborist

It gives you great relief if there’s someone that you can depend. If you request for a professional service, you won’t deal with any troubles. The permit will be issued to the contractor. Lincoln has the expertise to solve your tree problems. The licensed crew covers all the safety guidelines for trimming, pruning and removing trees. Experts with insurance will do the hard work for you.

Final Thoughts

To attain 100% customer satisfaction, hire a trained tree professional from Lincoln tree pruning services for effective tree trimming, removal, clean up, stump grinding, and a lot more. Lincoln tree pruning services is a leading service provider handling all sizes of trees. The crew with proper training is flexible in helping both residential and commercial property owners.

admin

Welcome to our website, the ultimate hub for the latest information! Discover the latest trends, innovations, and advancements in the world of technology, business and health. Explore our collection of informative articles, insightful guides , and helpful tips to enhance your savviness.

Learn More →

Leave a Reply